Aluminium Skirting Board
An aluminium skirting board closes the joint between the finished floor and the wall, and protects the wall base in service. Our sections are produced with 0.8–1.2 mm walls in 2.5 m lengths, with connector and corner accessories. MOQ starts at 300 m per profile.
IMAGE SLOT — product photo
white background, 2000 px minimum, your HD photo
Representative skirting sections and accessories
Representative sections from our die library. The dimension that matters most is the height, because it sets the visible band and has to line up with door frames and joinery. Tell us the height you need and we confirm the section.
IMAGE SLOT — section drawings and accessories
line drawings, replacement coming
Capability range
Every dimension below is confirmed against your drawing before production. Because the range is wide, we publish the working range rather than fixed SKUs.
| Item | Specification | What it means for your project |
|---|---|---|
| Material | Aluminium alloy | Extruded aluminium sections for interior trim |
| Grade | 6063-T5 | Standard architectural extrusion grade, confirmed against your specification before sampling |
| Item | Specification | What it means for your project |
|---|---|---|
| Height | 26–80 mm | The dimension that decides the look. It sets the visible band; confirm it against your door frames and joinery |
| Thickness | 0.8–1.2 mm | Standard range, with heavier walls on request |
| Standard length | 2.5 m | Supplied in standard lengths or cut to the size you need |
| Accessories | Left end, connector, internal corner, external corner | Matching accessories are produced to the same section and finish, so a run reads as one continuous line |
| Custom lengths | Cut to size | Cut to your required length on the production run |
Surface finishes and colours
| Item | Specification | What it means for your project |
|---|---|---|
| Surface finish | Anodized, powder-coated, wood-grain, brushed, polished, sandblasted | Available processes; powder coating can be matched to a RAL code |
| Gloss level | Glossy or matt | Every colour is available in either version — tell us the sheen you need |
| Colour | 10 standard | Silver, Gold, Rose Gold, Bronze, Champagne, Grey, Granite, Light Grey, Black, White |
| Custom colours | Matched to your sample | Colour matched to your reference — typically within 90% on standard tones; special colours confirmed in advance |
Ten colours are held as standard, and every one of them can be produced glossy or matt. Send a colour reference — a swatch, a photo or a RAL code — and we match it. On standard tones the match typically reaches 90%, and unusual colours are confirmed with a physical sample before production. If the sheen matters for your project, say so at the enquiry stage and we will confirm it with the sample.
The same ten colours are used across the whole range, so mixed profiles on one job match.
Where aluminium skirting is used
Aluminium skirting is specified in offices, hotels, retail and residential fit-outs where the wall base has to take wear: it resists scuffing, does not need painting and can be cleaned down.
IMAGE SLOT — installation photo
commercial corridor or hotel room, 2000 px minimum
Frequently asked questions
What heights do you produce?
Heights run from 26 mm to 80 mm across the standard dies, and other heights are produced on request. Tell us the height and the depth you need, and we confirm the section and the accessories.
Do you supply the connectors and corners?
Yes. A run needs more than the straight length: a left end, a connector for joints on long walls, and internal and external corner pieces. These are made to the same section and finish.
Is it suitable for commercial fit-outs?
Yes. Aluminium skirting is widely specified in offices, hotels and retail because it resists scuffing, needs no painting and can be cleaned down. Tell us the wall build-up and we confirm the section and the accessories.
Ordering and delivery
| Item | Specification | What it means for your project |
|---|---|---|
| Minimum order | From 300 m | Per profile; varies by design |
| Sampling | 10–15 days | Paid sample, credited back on your first production order |
| Production | 20–30 days | After sample approval |
| Tooling | Quoted per profile | New-profile tooling is inexpensive, which keeps small custom runs viable |
| Packaging | Carton packing | Export carton with protective wrapping on finished faces |
Send your drawing, or tell us the dimensions and the detail you need — we will come back on the height, the length and the accessories and a price.
Send your drawing on WhatsApp »
Questions in writing? Janesun@inbuildmaterial.com